1 | Extension of the garage by 1500mm |
2 | Include 2100mm x 2400mm roller door to the rear of garage |
3 | Internal access from the garage |
4 | Upgrade to Corinthian PMAD104 Front Entry door with translucent glazing |
5 | Upgrade to Corinthian Translucent glazing to Front Entry Frame sidelights |
6 | Keyed locks to all upper floor openable windows |
7 | Include doors to WIR in Master Bedroom and Bedroom 2 |
8 | Include door to Ensuite |
9 | Upgrade to 4-panel doors to all ground floor doors (Total of 7) |
10 | Upgrade front entry deadbolt to Gainsborough Contemporary Trilock |
11 | Privacy lock to all bedrooms, Ensuite, Bath, WC, Powder (Total of 8) |
12 | Relocate window in Rumpus |
13 | Include 900mm x 850mm pot drawers in Pantry |
14 | Upgrade cabinet handles to Kitchen, Pantry, Laundry |
15 | Security system NX12 with 4 detectors |
16 | 2-way switch in Master Bedroom |
17 | Upgrade batten holders and add to downlights (Total of 59) |
18 | Include 2 external junction box for lights outside garage |
19 | Addition of 3 TV points (Total of 4) |
20 | Addition of 1 telephone point (Total of 2) |
21 | Addition of 10 double power points |
22 | Addition of light point inside stairs area |
23 | Addition of 2 double waterproof power points |
24 | Upgrade heating control for downstairs/upstairs both to be variable |
25 | Include network controller for heating and evaporative cooling system |
26 | Upgrade wall shower mixer to Ensuite and Bathroom |
27 | Upgrade handheld showers to Ensuite and Bathroom |
28 | Niche to Bathroom shower |
29 | Addition of 1 external garden tap |
30 | Tile floor coverings to whole of ground floor |
31 | Render finish to Portico |
32 | Off-White mortar |
33 | Include Bradford Soundscreen R1.5 Insulation to Dining internal walls of upper floor waste void only |
34 | Include Bradford Soundscreen R1.5 Insulation to Bathroom/Bed4 |
35 | Include Bradford Soundscreen R1.5 Insulation to Bathroom/Bed3 |
36 | Upgrade external wall insulation to R2.0 Glasswool Batts |
Dressing the backyard
14 years ago
4 comments:
Upgrades/variations sound good. Just wondering how you went about adding the evap cooling unit to the study? Did you have to upgrade the current unit? We asked to do this also but were told that we needed to buy a 2nd smaller unit for this. Thanks.
My apologies... after reading your comment, I checked through the variations again and you're right, PD had taken out this request saying it cannot be done due to construction constrains. Thanks for highlighting. All the paperwork were done so long ago and it slipped off my mind :)
oh no thats fine! We asked for this too but they said they would only do it if we bought a 2nd unit and at $3500 we didn't think it was worth it for one vent! The manufacturers (Bonaire) said that the study should get fed from the lounge so we'll wait and see.
Thanks for replying.
Well at least your CS gave you option for 2nd unit, I don't think we were told of this option. But anyway, even if they did, it is too expensive to do it.
Post a Comment